Highlight and Options:
- Suitable for mounting on the wall or into wall opening.
- Easily attached front or rear projection screen surface with snaps or optional Velcro.
- Provides a perfectly flat viewing surface for video projection applications.
- Surface mounts to back of black powder coated frame that provides a masking border.
- Frame available with Pro-Trim® finish for an additional charge. Pro-Trim® is a fabric frame covering that aesthetically enhances the appearance of the installation while absorbing light that surrounds the viewing area.
Select Your Screen Surfaces:
Da-Mat®: White vinyl surface provides an exceptionally wide viewing angle and no resolution loss. Use when ambient light is good controlled. Viewing Angle: 60° Gain: 1.0
High Contrast Da-Mat®: Gray surface that lower the black levels of the image, creates a more film-like image. Best used when ambient lighting is good controlled. Viewing Angle: 45° Gain: 0.8
Da-Tex®(rear): A translucent, neutral gray vinyl fabric that allows rear projection. It requires tensioning due to its flexible nature. Viewing Angle: 30° Gain: 1.3
Pearlescent: A non-supported vinyl fabric. A good choice for a lower output projector and where there is a high amount of ambient light present. Viewing Angle: 40° Gain: 1.5
Cinema Vision: non-supported vinyl fabric. It increases reflectivity to enhance the image brightness. Used in low level of ambient light. Viewing Angle: 45° Gain: 1.3
High Contrast Cinema Vision: With its enhanced black levels and brilliant white levels, this screen surface provides deep life-like colors and greater detail and sharpness to the image. Used when ambient lighting is moderately controlled. Viewing Angle: 50° Gain: 1.1
High Contrast Cinema Perf: With the same optical characteristics as High Contrast Cinema Vision, this surface is perforated to allow the sound to transmit through the material. Viewing Angle: 50° Gain: 1.1
High Power: Provides the the highest gain as a glass beaded surface with the ability to be cleanable. Viewing Angle: 30° Gain: 2.4
Dual Vision: Capable of both front and rear projection. Ideal for controlled light conditions. Exceptionally wide viewing cone. Surface needs to be tensioned. Viewing Angle: 50° Gain: 1.0
Audio Vision: It provides the same optical characteristics as the Da-Mat surface with specially designed perforations to allow sound to pass through the screen material. Viewing Angle: 60° Gain: 1.0
High Contrast Audio Vision: With the same optical characteristics as the High Contrast Da-Mat material with the capability to allow the sound to be transmitted through the material. Viewing Angle: 45° Gain: 0.8 3D Virtual Grey: Designed specifically for 3D front projection systems, retains 99 percent of polarized light. Capability to maintain high extinction values and excellent image contrast. Gain: 1.85
|SKU||83414, 87675, 83418, 83419, 83420, 90255, 91523, 83421, 83422, 83515, 91347, 37293|
|Aspect Ratio||16:9 HDTV Format|
|View Area (H x W, In.)||45 x 80|